Radio Settings Cheat Sheet

BAOFENG DM32-UV ##################################
for example:
  freq 146.700
  offset - (minus)   technically -0.60mhz offset between rx and tx
  tone 88.5          to open up the repeater

1. Select correct top//bottom freq by clicking HOME button (top right)
2. If not in VFO mode HOLD the HOME button (top right)
3. Set FREQUENCY by typing 14670000 on keyboard

4. set OFFSET direction
  a. Click MENU button (upper left)
  b. Rotate knob to SETTINGS
  c. Click MENU
  d. Rotate knob to CHANNEL SET
  e. Click MENU
  f. Rotate knob to SFTD
  g. rotate to - MINUS
  h. Click MENU

8. Set OFFSET frequency
  a. Click MENU button (upper left)
  b. Rotate knob to SETTINGS
  c. Click MENU
  d. Rotate knob to CHANNEL SET
  e. Click MENU
  f. Rotate knob to FREQ offset
  g. Type 600 (use HOME button as BACKSPACE)
  h. Click MENU

Set  TONE frequency
  a. Click MENU button (upper left)
  b. Rotate knob to SETTINGS
  c. Click MENU
  d. Rotate knob to CHANNEL SET
  e. Click MENU
  f. Rotate knob to CTC/DCS
  g. Click MENU
  h. Rotate knob to TX/CTC DCS
  i. Click MENU
  j. Rotate knob to CTCSS
  k. Click MENU
  l. Rotate knob to 88.5
  m. Click MENU
  n. Click BACK repeatedly to get back to main screen

HOW TO keypad LOCK   (does not affect channel knob nor volume)
  a. Click and HOLD * key (lower left)

HOW TO keypad UNLOCK
  a.       Click HOME
  b.       Click * key (lower left)


BAOFENG BF-F8HP ##################################
for example: 
  freq 146.70 
  offset - (minus) 
  tone 103.5

1. Select correct side by pressing A/B

2. Goto FREQ mode by pressing VFO/MR

3. Set FREQUENCY
  b. type 146700
  b. press EXIT

4. set OFFSET direction 
  a. Press MENU 
  b. Select 25 via up/down
  c. Press MENU
  d. press up/down until - minus
  e. press MENU
  f. press EXIT

5. set TONE 
  a. Press MENU 
  b. Select 13 via up/down
  c. Press MENU
  d. press up/down until 103.5
  e. press MENU
  f. press EXIT

HOW TO LOCK or UNLOCK
  a. Hold # to lock/unlock

ANYTONE 5888UV ##################################
for example: 
  freq 146.70 
  offset - (minus) 
  tone 103.5

1. Select correct side by clicking A/B on MIC

2. goto FREQ mode via V/M

3. Set FREQUENCY
  a. type 146700 on mic
  b. if disallowed hold/rotate? ?top knob to set ?

4. set OFFSET direction 
  a. Click SET 
  b. Rotate knob to 33
  c. CLICK 
  d. rotate to - MINUS
  e. hold top knob (?CLICK AND HOLD?)

5. set TONE 
  a. Click SET 
  b. Rotate knob to 10
  c. CLICK 
  d. rotate to CTCSS
  e. CLICK
  d. rotate to 103.5
  e. hold top knob (?CLICK AND HOLD?)

HOW TO LOCK or UNLOCK
  a. Click SET 
  b. Rotate knob to 21
  c. CLICK 
  d. rotate to ON
  e. hold top knob (?CLICK AND HOLD?)